AERIUS System Configurations

Aerius Automated Infrared Imaging System

• Includes the Aerius Instrument, computer with LCD monitor, Aerius Application Software, and Aerius Accessory Pack which includes a membrane carrier.

Aerius Automated Infrared Imaging System—With Plate Stacker

• Includes the Aerius Instrument, Bio-Stack Microplate Stacker, Bio-Stack Plate Stacker install kit (includes stand, alignment tools and cables), computer with LCD monitor, Aerius Application Software, and Aerius Accessory Pack which includes a membrane carrier.

Aerius Specifications

Laser/Microscope

• Aeruis Specifications

  Laser/Microscope

  • Laser Lifetime: 60,000 hours typical
  • 700 Channel Laser Source: Solid-state diode laser at 685 nm
  • 800 Channel Laser Source: Solid-state diode laser at 785 nm
  • Detectors: Silicon avalanche photodiodes
  • Scanning Speed: 6 minutes per microplate with 100 µm resolution
  • Resolution: 20 - 500 µm
  • Focusing Range: 2.25 µm (suitable for most microtiter plates with transparent, flat-bottom wells.)

  Operation Specifications

  • Operating Conditions: 15-35º C and dew point no greater than 20º C
  • Power Requirements: Automatic voltage selection at 90-250 VAC and 47-63 Hz; 1.1 Amps at 120 V; 200 watts maximum
  • Dimensions (instrument only): 36 h x 45 w 57 d cm (14 x 18 x 22 inches)
  • Dimensions (instrument with stacker): 85 h x 110 w x 45 d cm (33 x 44 x 18 inches)
  • Weight: 26 kg (56 lbs)
  • Data Storage Capacity: > 25 GB
  • Network Protocol: TCP/IP
  • Network Connection: Cat. 5 RJ-45, 10 Base-T/100 Base-TX
  • Bar Code Reader symbology: Code 39 preferred. Compatiable with Code 128 and other symbologies. Contact LI-COR for more information