LI-610 Specifications

Accuracy:  ± 0.2 °C (0-50 °C)

Stability:  <0.02 °C per day at 25 °C typical; <0.04 °C per day at 25 °C maximum

Noise Level:  0.01 °C peak-to-peak

Repeatability:  0.01 °C

Response Time:  Typically 15 seconds per °C when changing from ambient to a higher dew point; 30 seconds per °C for dew points lower than ambient

Temperature Sensor:  Platinum resistance temperature detector (RTD)

Flow

          Flow Rate:  Adjustable; typically 2.0 liters per minute

          Flow Meter Type:  Dwyer series RMA.  2.5 liters per minute full scale

          Flow Meter Accuracy:  ± 4% of full scale reading

          Flow Outputs:  Two rapid connect hose fittings for 4 mm ID by 6 mm OD plastic tubing.  Accepts 1/4" OD tubing with 1/8 to 3/16" ID

          Maximum Input Flow:  2 liters per minute.  Contact LI-COR about using higher input flow rates

Analog Output:  0 to 5 V, 100 mV / °C

Command Output:  0 to 5 V, 100 mV / °C

Display:  4 1/2 digit LCD for displaying dew point set temperature (°C), actual dew point temperature (°C), or battery voltage

Display Resolution:  0.01 °C

Operating Temperature:  0 to 50 °C, 0 to 100% RH

Power Requirements:  10.5 to 16 VDC, 5.5 amps max current draw; or 108-126/216-252 VAC with 610-01 AC Module

Dimensions:  23.5 H x 21 W x 28.5 D cm (9 H x 8.1 W x 11" D)

Weight:  7.86 kg (17.4 lbs.)