prevnext

LI-840 Specifications

CO2 Specifications

Measurement Range:  0-3000 ppm

Accuracy:  Better than 1.5% of reading

Calibration Drift

          1Zero Drift:  < 0.15 ppm/ °C

          2Span Drift at 370 ppm:  < 0.03%/ °C

          3Total Drift at 370 ppm:  <0.4 ppm/ °C

RMS Noise at 370 ppm with 1 sec Signal Filtering: < 1 ppm

Sensitivity to Water Vapor: < 0.1 ppm CO2/ppt H2O

H2O Specifications

Measurement Range:  0-80 ppt

Accuracy:  1.5% of reading

Calibration Drift

          Zero Drift:  < 0.003 ppt/ °C
          Span Drift at 10 ppt:  < 0.03%/ °C          Total Drift at 10 ppt:  < 0.009 ppt / °C

RMS Noise at 10 ppt with 1 sec Signal Filtering: < 0.01 ppt

Sensitivity to CO2 < 0.0001 ppt H2O/ppm CO2

1Zero drift is the change with temperature at 0 concentration
2Span drift is the change after re-zeroing following a temperature change
3Total drift is the change with temperature without re-zeroing or re-spanning

Measurement Principle:  Non-Dispersive Infrared

Traceability:  Traceable gases to WMO standards for CO2. NIST certified LI-610 Portable Dew Point Generator for H2O

Pressure Compensation Range:  15 kPa-115 kPa

Maximum Gas Flow Rate:  1 liter/minute

Output Signals:  Two Analog Voltage (0-2.5 V or 0-5 V) and Two Current (4-20 mA)
  Digital: TTL (0-5 V) or Open Collector
   

DAC Resolution:  14-bits across user-specified range

Source Life:  18000 hours

Power Requirements: Input Voltage 12-30 VDC
  1.2A @ 12V (14 W) maximum during warm-up with heaters on
  0.3 A @ 12 V (3.6 W) average after warm-up with heaters on
   

Supply Operating Range:  12-30 VDC

Operating Temperature Range:  -20 to 45°C

Relative Humidity Range:  0 to 95% RH, Non-Condensing

Dimensions:  8.75" x 6" x 3" (22.23 x 15.25 x 7.62 cm)

Weight:  2.2 lbs (1 kg)

prevnext
x
A A A
line
800 | 1024 | max
Biotechnology
4647 Superior St
Lincoln, NE 68504
Toll-Free: 800-645-4267
Email: biohelp@licor.com
Environmental
4421 Superior Street
Lincoln, NE 68504
Toll-Free: 800-447-3576
Email: envsales@licor.com