data not detected

Environmental Forum Forums EddyPro data not detected

This topic contains 1 reply, has 2 voices, and was last updated by  IsraelB 8 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #8115

    lucie
    Participant
    Hello,
    I have some problem with eddypro’ s basic settings,
    the data I drop in the raw data directory are not detected anymore,
    even if I use the same file than before (it was working properly until I change my computer),
    I also checked that the raw file name format are the same as my files ( TOA5_ts_data_yyyy_mm_dd_HHMM.dat).
    Would someone have an idea of where the problem is ?
    thank you very much !
    Lucie
    #8127

    IsraelB
    Keymaster

    Hello Lucie,
    Sorry for the delayed response.
    If you are still having problems I would suggest checking what file types you choose on the Project settings page. Make sure you have ASCII or Binary option selected.
    In addition, if you already have something in the file name field remove it and use the option ‘Set’ to see if EddyPro recognizes what files are available.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Comments are closed.