Disabling angle of attack correction (advanced option) for Gill anemometer

Environmental Forum Forums EddyPro Disabling angle of attack correction (advanced option) for Gill anemometer

This topic contains 1 reply, has 2 voices, and was last updated by  IsraelB 6 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1446

    schan
    Participant

    Hi LICOR,

    In the EddyPro ‘Advanced settings’ under ‘Raw processing options’ there is a check box for ‘Angle-of-attack correction for wind components (Gill’s only)’. By default it is enabled (checked) but can it be disabled? I have tried unchecking this option but fail to see any change in the outputs (running in advanced mode). Is it automatically enabled when a Gill anemometer is chosen? On a related note, every time I open a saved project this option is checked regardless of how I last saved it. Lastly, in the *.eddypro output files, what is the variable/field name that denotes this option so I can confirm what settings were used?

    FYI – I am using a Gill R3-50. Pitch angles are ~5% (small but not negligible).

    Thank you kindly for your assistance.

    #1800

    IsraelB
    Keymaster

    There is a bug with this implementation in version 4.1.0. It will be fixed in the next release due to come out anytime now! We are hoping tomorrow or early next week.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Comments are closed.