The wait is over! You can now get fully corrected flux results, in real time at your measurement site. The SMARTFlux™ System provides automated, real-time processing of raw data using EddyPro® at your site.
For more information on SMARTFlux or to request a quote, go to www.licor.com/smartflux.
Diagnostics are used to indicate whether your instrument is operating correctly. The LI-7500 and LI-7500A Open Path CO2/H2O Analyzers output integers between 0 and 255 that correspond to as many as 5 diagnostic values. The diagnostic values of the LI-7200 Enclosed CO2/H2O Analyzer and LI-7700 Open Path CH4 Analyzer are integers between 0 and 65535 that indicate up to 10 and 16 diagnostics, respectively. A detailed explanation of the diagnostic values for the LI-7500A and LI-7200 and how to decipher…
Many LI-COR instruments have dedicated software to download data to a Windows®, Mac®, or Linux computer. The LI-1000 Datalogger, however, does not. Fortunately, most command-line terminal programs are able to receive data from the LI-1000. Below are the steps necessary to download data from the LI-1000, using a free terminal program called Tera Term.
1. Connect the RS-232 serial cable to the LI-1000. This is a 9-pin to 25-pin null modem cable.
2. Connect the other end to the computer,…
On October 9th, the LI-6400XT Portable Photosynthesis System was featured on Jeopardy! as part of a video question on photosynthesis. Below is the short (21 second) video clip:
Argentina
El 21 de septiembre del 2013, personal de Instrumentalia, distribuidor de LI-COR en Argentina, viajó a la ciudad de Rosario, Santa Fe para presentar un día de cátedras titulado “Tecnologías para las Mediciones de Flujo e Intercambio Gaseoso”. La disertación fue llevada a cabo por el Ing. Agr. MSC. Edmundo Ploschuk. Dentro de los temas cubiertos se encuentran: Cómo Medir Intercambio de Gases; el Método Covarianza de Eddies, así como equipos diseñados para hacer este tipo de mediciones. Veinte…
