Browsed by
Month: December 2017

Resolving a Leak Issue With the LI-6800

Resolving a Leak Issue With the LI-6800

Leaks will get your attention by causing a leak/flow test failure (Start Up->Warmup/System Tests), low ‘Flow’ reading (mass flow to chamber in the diagram), low ‘Flow_s’ or ’Flow_r’ reading (flow through the sample/reference gas analyzer). The following three warning messages may appear on the upper left corner of the display: ‘Console flow leak?’, ‘Flow_s low’, ‘Flow_r low’ (see Table 5-2 on the page 5-4 of the LI-6800 manual for more details).

  1. If you can achieve ‘Flow’ setpoint, but…

    Read More Read More