Pearl® Trilogy Imager Specifications
- Dynamic Range:
22 bit (>6 logs)
- Detector Type:
CCD. Thermoelectrically cooled.
- Scan Time:
500 ms to 60 seconds, depending upon camera settings.
- 700 nm Channel:
Excitation 685 nm, Emission 720 nm
- 800 nm Channel:
Excitation 785 nm, Emission 820 nm
- Bioluminescence Channel:
Excitation N/A, Emission 450 nm - 640 nm
- White Channel:
Excitation white, Emission, NA
IRDye® 680, IRDye 700DX, IRDye 800RS, IRDye 800CW, Alexa Fluor 680, Alexa Fluor 750, Cy5.5, Cy7
85, 170 or 255 micron
- Image Display Options:
Pseudocolor, grayscale, single color (red, green or blue), or two colors with overlapping fluorescence displayed in a third color.
One animal, with linked look-up tables for image normalization
- Imaging Bed:
16.8 cm W x 12 cm D (6.6" W x 4.75" D). Vertical clearance to top of drawer is 3.8 cm (1.5").
- Field of View:
11.2 cm W x 8.4 cm D (4.4" W x 3.3" D) at surface of imaging bed.
- Imaging Bed Temperature Range:
- Gas Anesthesia:
Inlet and outlet ports flow anesthesia gas through a nose cone in the imaging drawer. A rotameter is included for flow rate control.
- Acquisition Speed:
500 ms - 60s
- Power Requirements:
Universal input range is between 100-127 VAC and 200-240 VAC (voltage fluctuations not to exceed 10% of the nominal voltage); 50/60 Hz; at 120V, 4 Amp maximum; at 120V, 0.3 Amp typical when idle. Overvoltage Category II
41 W x 41 D x 66 cm H (16" W x 16" D x 26" H). Depth with imaging drawer open is 63.5 cm (25").
23 kg (50 lb).
- Software Specifications
Specifications for Window® and Mac® Computers