Setting the timezone

The date and time are logged in your data files and are used to distinguish observations. Setting the timezone is not only important for accurate data, but also for any time-matching that may need to be done in SoilFluxPro Software. You should only need to set your timezone once, unless you have moved your research site to a new timezone.

To set the timezone:

1. Connect to the LI-8250 Multiplexer user interface and go to the Device Settings page.
2. Select your Current Timezone from the drop-down.



3. Click Apply to save the timezone.

Note: You must always Apply after changing the timezone. If you navigate to other pages without clicking Apply, your changes will not be saved.