[x]Close

Thank you for your request.

You will receive an email shortly.

If you do not receive it within 24 hours or if you have any questions, please contact LI-COR at 1-402-467-3576.

[x]Close

Get a Quote

Terrestrial Sensors

Select a Sensor
Select the Cable Length
Select a Readout or Logging Device

BNC Terminals connect to an LI-1500, LI-1400, LI-250A, or any device that accepts a BNC connector and reads a μA signal.

Bare Leads connect to any logger that reads a μA signal, such as the LI-1400 terminal block.

Standard Millivolt Adapters standardize the sensor output signal to 0 to 10 mV. They connect to any device that reads a millivolt signal in this range. An adapter is paired with a specific sensor.

Underwater Sensors

Underwater sensor cables are purchased separately.

Select a Sensor
Select Cable Length
Select a Readout or Logging Device

BNC Terminals connect to an LI-1500, LI-1400, LI-250A, or any device that accepts a BNC connector and reads a μA signal.

Bare Leads connect to any logger that reads a μA signal, such as the LI-1400 terminal block.

Standard Millivolt Adapters standardize the sensor output signal to 0 to 10 mV. They connect to any device that reads a millivolt signal in this range. An adapter is paired with a specific sensor.

Line Sensor

Each LI-191R includes a bubble level and carrying case.

Sensor
Select the Cable Length
Select a Readout or Logging Device

BNC Terminals connect to an LI-1500, LI-1400, LI-250A, or any device that accepts a BNC connector and reads a μA signal.

Bare Leads connect to any logger that reads a μA signal, such as the LI-1400 terminal block.

Standard Millivolt Adapters standardize the sensor output signal to 0 to 10 mV. They connect to any device that reads a millivolt signal in this range. An adapter is paired with a specific sensor.

Thank you for your request.

You will receive an email shortly.

If you do not receive it within 24 hours or if you have any questions, please contact us.

Continue Reading About Light Sensors