Videos

The following video tutorials show how to use the LI-600 Porometer/Fluorometer.

Unpacking the LI-600

This video shows what's in the box with the LI-600.
Overview of the configuration software

This video provides an overview of the LI-600 software.
Configuration details

This video provides a more detailed overview of the configuration options.
High through-put measurements

The LI-600 is designed to make fast survey measurements. This video shows a typical setup for high through-put measurements.
Maintaining the LI-600

This video presents basic maintenance procedures for the LI-600.
Zeroing with the zero kit and internal pump

This video shows how to set the zero using the zero kit and internal pump.
Zeroing with tank gas or an external pump and desiccant

This video shows how set the zero using a tank of zero gas or an external pump with desiccant.
Setting the span

This video shows how to set the span calibration.
Servicing the pump

This video shows how to expose the internal pump for servicing.
Installing the 600-01 fluorometer upgrade kit on the LI-600 Porometer/Fluorometer

This video shows how to install the fluorometer on instruments that were originally provided without a fluorometer.
LI-600 Webinar Series - Session 1: Introducing the LI-600 Porometer/Fluorometer

In session 1, learn about the instrument’s features—including measurement techniques and key specifications.
LI-600 Webinar Series - Session 2: LI-600 Theory

In session 2, learn about the instrument theory—from its steady state design to stomatal conductance and chlorophyll a fluorescence measurement parameters and benefits.