Help and Documentation

Welcome to the LI-610 Portable Dewpoint Generator help and documentation.

Top Resources

LI-610 Dew Point Generator Instruction Manual

(610_Manual_06659.pdf)

LI-610 Dew Point Generator Instruction Manual.

LI-610 Portable Dew Point Generator instruction manual addendum

(610_Manual_Addendum_DPG104.pdf)

LI-610 Dew Point Generator instruction manual addendum.

Air Pump Replacement Instructions

Instructions for replacing the diaphragm pump in the LI-610 Portable Dew Point Generator.

Reference card for the LI-610 conversions

(610_Misc_Reference_Card.pdf)

Reference card for conversions with the LI-610 Portable Dew Point Generator.

Dew Point Generator Cannot Reach Below Ambient Temperatures

This technical tip describes some possible solutions when the LI-610 Portable Dew Point Generator is unable to reach temperature setpoints below ambient.

Temperature Cannot be Adjusted

This technical tip describes some possible solutions when turning the adjustment knobs on the LI-610 front panel has no effect on the displayed temperature.

View all documents...

LI-610 Factory Recalibration

Recommended Recalibration Frequency: No regular factory recalibration required.

What's included with recalibration?

Request Service and Recalibration

To request factory service or recalibration for a LI-COR instrument: Request Factory Service or Recalibration

Service will be performed at our US office in Lincoln, NE USA, European office (LI-COR Biosciences - GmbH), or by a distributor. To locate your country and designated point of contact click here.

Looking for a Calibration Certificate?