Help Center
NEW! Using the LI-600F or LI-600N red LEDs as a variable actinic light source
This application note describes how the LI-600F and LI-600N red LEDs can be controlled as a variable actinic light source for steady-state and rapid electron transport rate–irradiance (ETR–Q) curves.
Factory Service and Recalibration
Factory calibration is an integral step in the manufacture and repair of all LI-COR measuring instruments.
To request factory service or recalibration for a
LI-COR instrument, request factory service or contact
your local distributor. Service will be
performed at our US office in Lincoln, NE USA, European office (
LI-COR GmbH), or by your local
distributor.